The main technical advantages of high strength gypsum consumption technology are as follows:

　　(1)工藝簡單，轉晶、枯燥一次性完成，磨粉后即為產品。

　　(1) The process is simple, the crystallization and dryness are completed at one time, and the product is grinded.

　　(2)原料來源普遍，能夠運用磷石膏，也能夠運用脫硫石膏等其它工業副產石膏，也能夠運用陶瓷廢模、或其它石膏，當然也能夠運用自然石膏。

　　(2) Material sources are widespread. It can use phosphogypsum, desulfurization gypsum and other by-products of industry. It can also use ceramic waste moulds or other gypsum. Of course, it can also use natural gypsum.

　　(3)不外加蒸汽、不外加水分，能夠不添加任何化學轉晶劑、活性劑、分散劑、晶種等化工資料，就能消費α50以下的高強度石膏，消費本錢低，有害成分少。

　　(3) Without adding steam or water, and without adding any chemical crystallizer, activator, dispersant, seed and other wage materials, high strength gypsum below alpha 50 can be consumed with low cost and less harmful ingredients.

　　(4)消費效率高，消費周期短，普通僅需求4~6小時，而傳統工藝卻要20~24小時，效率進步6~4倍。

　　(4) Consumption efficiency is high, consumption cycle is short, the general demand is only 4-6 hours, while the traditional process takes 20-24 hours, efficiency improvement is 6-4 times.

　　(5)熱應用率高，能耗低于建筑石膏，能夠不用鍋爐，投資儉省。

　　(5) High heat application rate, lower energy consumption than building gypsum, can not use boilers, save investment.

　　(6)質量易控，產品能夠千變?nèi)f化，市場順應才能強，用處普遍。

　　(6) The quality is easy to control, the product can be ever-changing, the market can adapt to strong, universal use.

　　(7)機械化作業，自動化水平高、用工量少。

　　(7) Mechanized operation with high automation level and low workload.

　　(8)環保性能好，工廠無廢渣、廢水外排，全廠干凈化消費。

　　(8) Good environmental protection performance, no waste residue, waste water discharge, clean consumption of the whole plant.

　　干法工藝過程非常簡單、緊湊，消費各環節全部為機械化、自動化作業，勞動強度低、用工量少，產品穩定、牢靠；但產質量量能夠自在的控制在α30~α50之間；較好的原料，也能夠到達α60以上，完整滿足a型高強石膏規范JC/T2038-2010，和陶瓷模用石膏規范QB1639-92的技術請求。

　　The process of dry process is very simple and compact, and all links of consumption are mechanized and automated operation, with low labor intensity, less workload and stable and reliable products; however, the output and quality can be controlled freely between alpha 30 and alpha 50; better raw materials can also reach alpha 60, which fully meets the JC/T 2038 specification of type A high strength gypsum.- 2010, and Technical Requirements of Ceramic Mould Gypsum Specification QB1639-92.

　　特別值得稱道的是：在干法消費高強度石膏的過程中，能夠依據不同廠家的詳細請求，在消費過程中自在的調整石膏制品的技術指標，而不需求再經過后續分配過程，也不需求化學添加劑，是目前消費高強度石膏投資省、本錢低、質量容易控制的新工藝。

　　It is particularly commendable that in the process of dry process consumption of high strength gypsum, the technical indicators of gypsum products can be adjusted freely according to the detailed requests of different manufacturers in the process of consumption, without the need for subsequent distribution process or chemical additives. It is the most economical and cost-effective way to consume high strength gypsum at present. New technology with the lowest cost and the easiest quality control.

　　應該闡明的是，工業副產石膏大都存在雜質超標的問題，為此，工業副產石膏原料應該先行無害化處置，使之到達干凈化產品消費的請求，目前干凈化處置工業副產石膏的技術曾經成熟，能夠范圍化施行工業消費，干法消費高強度石膏技術與原料的干凈化處置技術相分離，就能夠徹底處理工業副產石膏污染的社會難題，真正完成化害為利、變廢為寶的愿望。

　　It should be clarified that most of the by-product gypsum in industry has the problem of excessive impurities. Therefore, the raw materials of by-product gypsum should be disposed of harmlessly in order to meet the requirement of consumption of cleaner products. At present, the technology of cleaner disposal of industrial by-product gypsum has been mature, which can be applied to industrial consumption in a wide range and the dry process consumption is high. Separation of strength gypsum technology from dry cleaning and disposal technology of raw materials can thoroughly deal with the social problems of gypsum pollution caused by industrial by-products, and truly fulfill the desire to turn harm into benefit and waste into treasure.